Before Using For The First Time; Before Each Use - Bella 90073 Instruction Manual

BEFORE USING FOR THE FIRST TIME

1. Carefully unpack your Multi Cooker. Remove all packaging materials from parts and
accessories. Remove all labels and tags from the product.
2. Unlock the Lid: Firmly grasp the lid handle (Figure 3) and turn the lid clockwise (follow the
arrow) to the UNLOCK position to open. (See Figure 4.)
Figure 5
Cover Grip
Center Hole
Aluminum
Cover
Center Pin
Lid
3. Lid Disassembly: Remove lid and rest on countertop, handle side down. Grasp the cover grip
and pull to remove aluminum cover from the underside of the lid. (See Figure 5.) Remove
gasket. (See Figure 6.)
4. Remove and wash the non-stick cooking pot, aluminum cover, gasket, rice measuring cup
and spatula in warm soapy water. Rinse with clean water and dry thoroughly.
Figure 7
Gasket
Center Hole
Aluminum
Cover
SO-315490_90073_BELLA ProSeries_8qt Multi Cooker_Best Buy_IM_R1.indd 12-13
Figure 6
Gasket
Cover
Grip
Center
Hole
Aluminum
Cover
Figure 8
Cover Grip
Center Hole
Aluminum
cover
Center Pin
Lid
12
5. Lid Assembly: Replace clean gasket. Make sure the gasket is attached properly around
the aluminum cover. (See Figure 7.) With the cover grip facing outwards, place the cover's
center hole over the pin in the center of the lid's underside. (See Figure 8.) Firmly press the
aluminum cover into the inside of the lid.
IMPORTANT: Check to make sure the aluminum cover is securely in place on the lid.
6. Slide the condensation tray into place on the side of the base unit. (See Figure 9.)
7. Clean and dry the bottom of the removable
cooking pot as well as the heating plate,
making sure there are no unwanted materials
on the surface. The removable cooking pot
must sit flat on the heating plate to ensure
proper contact.
8. Place the Digital Multi Cooker on a flat,
level surface, approximately 2 feet from a
standard 3-prong 120V electrical outlet. DO
NOT let cord hang over the edge of a table or
countertop.
WARNING: When slow cooking or cooking under pressure, never place the Digital Multi
Cooker under cabinets. When releasing steam, make sure the area several feet above the
pressure release valve is clear from all lighting fixtures, furniture or cabinetry.
9. Connect the detachable power cord to the receptacle at the back of the Digital Multi Cooker.

BEFORE EACH USE

1. Always check the lid to ensure the pressure release valve is in good working order and there
are no foreign particles blocking the valve openings on the underside of the lid.
2. Make sure gasket is attached correctly to the aluminum cover and is in proper position on
the underside of the lid. Multi Cooker settings.
Figure 9
Slide in
Condensation
Tray
13
2018-07-10 12:59 PM