Page 2
® installation that are not answered in the following directions, please contact your local sound contractor or the Soundsphere ® MSE Audio technical support team. Contact information can be found on the back of the manual. HK Hanging Kit Hang Mounting from Above The hanging kit is attached when ordered with the speaker from the factory.
Installing the Speaker The steel bracket is pre-fastened to the ceiling or wall, then the speaker is placed on the bracket and secured in the following steps (see figures 6 & 7): a) Fasten the bracket in the desired location, making sure that it is properly and safely mounted. b) Slide the side of the reflector opposite the screw over one end of the installed bracket.
Page 4
When ordered with the Model 110B or Q-6, the TX-30 is mounted to the back of the reflector and the loudspeaker driver connections are made at the factory. Use either black wire for input common or driver (-) connections. ® ® Soundsphere by MSE Audio | 6400 Youngerman Circle | Jacksonville, FL 32244 913-663-5600 or 855-663-5600 | www.soundsphere.com...
Need help?
Do you have a question about the Soundsphere 110 B and is the answer not in the manual?
Questions and answers