Foot Switch Jack; Operation Notes - 3rd Power Wooly Coats Spanky MKII User Manual

Back Panel:
16

Foot Switch Jack (16)

The FOOT SWITCH jack is provided so that you can turn the onboard effect(s) on and off as desired.
In the reverb-only version, this jack is a standard "tip/sleeve" configuration. In the reverb + tremolo
version, this jack is configured as a "tip/ring/sleeve" allowing control of both effects.
To Tank Reverb Connection (17)
This RCA jack connection is provide to send the amplifier signal to the reverb tank.
From Tank Reverb Connection (18)
This RCA jack connection is provide to receive the return signal from the reverb tank.

OPERATION NOTES:

• To avoid unnecessary noise, please make sure that you use a standard "shielded" guitar cable for
the reverb-only foot-switch connection.
• To avoid unnecessary noise, please make sure that you use a "shielded" TRS cable for the reverb
+ tremolo foot-switch connection.
• Please make sure that the reverb send and return are connected with proper orientation and
that you are using shielded RCA wire connections.
17
18
01016
9