Table of Contents
Advertisement
Parts description /
Scope of supply
1.
Detergent reservoir
2.
High-pressure washer
3.
Spray gun holder
4.
Cord bracket
5.
High-pressure hose
6.
Hand crank
7.
Handle
8.
Rotating brush (low-pressure accessories)
9.
Turbo lance
10.
Variable spray lance (used with a high-pressure nozzle)
11.
Spray gun
12.
2 cross recessed pan head tapping screws
13.
Cleaning solution
14.
Water intake adapter
15.
Nozzle needle
16.
Translation of the original operating instructions
NOTE
The following accessories which are required for operation are not included.
The user can purchase these accessories in local shops.
1 off water hose
1 off water backflow preventer
(a water backflow preventer must be used if the machine is to be connected to the
drinking water supply)
+44 (0) 190 472 7501
AFTER SALES SUPPORT
GB
+353 (0) 19022605
IRE
12
www.coreservice.co.uk
Q1W-SP14-1900A
3
Commissioning
Unpacking
Unpack the machine and the accessories carefully and, referring to the diagram and
to the list on pages 1 and 12, check that all the listed parts are present.
Completely remove all the packaging materials and ensure that all the parts are
undamaged and in proper working order.
Do not put a damaged or incomplete machine into operation; instead, contact our
Customer Service or the dealer from whom you bought the machine.
Assembly
WARNING
Remove the plug at the mains before performing any work on the machine
and only use OEM accessories.
The following operational steps are required in order to make the machine ready for
service. The diagrams can be found on pages 1 to 3 of the brochure cover.
Assembling the handle (Figure 1)
•
Place the handle onto the high-pressure washer. Secure it in place with the two
enclosed cross recessed pan head tapping screws.
Attaching the brackets for the spray gun and cord (Figure 2)
•
Insert the two brackets, as illustrated, into the receptacles on the machine as far
as they will go.
Connecting the hose to the spray gun (Figure 3)
•
Remove the protective cap from the threaded connector of the spray gun (11)
and screw the high-pressure hose (5) securely to the spray gun.
Connecting the lance to the spray gun (Figure 4)
•
•
Insert the turbo lance (9) or the spray lance (10) into the connection on the spray
gun (11) and turn the lance clockwise by 90° to lock it in this position.
AFTER SALES SUPPORT
13
+44 (0) 190 472 7501
GB
www.coreservice.co.uk
+353 (0) 19022605
IRE
4
Q1W-SP14-1900A
Hide quick links:
Advertisement
Table of Contents
