Safety & Warning Instructions - Jorc TEC-44 Installation & Maintenance Instructions Manual

Motorised ball valve
Hide thumbs Also See for TEC-44:
Table of Contents

Advertisement

SAFETY INSTRUCTIONS
SAFETY AND PROPER USAGE
To ensure safe and enduring performance of this product, you must comply strictly with the instructions
enclosed herein. Non-compliance with instructions or improper handling of the product will void your
warranty! This product is designed to drain condensate from compressed air systems. Usage of this product
in conditions not specified in this manual or in contrary to the instructions hereby provided is considered
IMPROPER. The manufacturer will not be held liable for any damages resulting from improper use of the
product.
SAFETY & WARNING INSTRUCTIONS
ATTENTION
- Observe valid and generally accepted safety rules when planning, installing and using this product.
- Take proper measures to prevent unintentional operation of the product or damage to it.
- Do not attempt to disassemble this product or lines in the system while they are under pressure.
- Always depressurise the compressed air system before working on the system.
It is important that personnel use safe working practices and observe all regulations and legal
requirements for safety when operating this product. When handling, operating or carrying out
maintenance on this product, personnel must employ safe engineering practices and observe all local
health & safety requirements & regulations. International users refer to regulations that prevail
within the country of installation. Most accidents, which occur during the operation and
maintenance of machinery, are the result of failure to observe basic safety rules or precautions. An
accident can often be avoided by recognising a situation that is potentially dangerous. Improper
operation or maintenance of this product could be dangerous and result in an accident causing
injury or death. The manufacturer cannot anticipate every possible circumstance, which may
represent a potential hazard. The WARNINGS in this manual cover the most common potential
hazards and are therefore not all-inclusive. If the user employs an operating procedure, an item of
equipment or a method of working which is not specifically recommended by the manufacturer he
must ensure that the product will not be damaged or made unsafe and that there is no risk to
persons or property.
2
2

Advertisement

Table of Contents
loading

Table of Contents