Brother AIRScouter WD-350B Installation And Operation Manual
Hide thumbsAdvertisement
Quick Links
Printed in Japan
D00UNN001A
WD-350B
Quick Setup Guide
English
Before using the AiRScouter, make sure you read the Product Safety
Guide first. Then read this Quick Setup Guide for correct setup and use
of the AiRScouter, and keep it for future reference.
Note that product options and accessories may vary depending on the
country of sale.
Product Safety Guide (included in the box)
This guide provides important safety information for the AiRScouter.
Read it carefully before use.
Quick Setup Guide (this guide)
This guide provides basic information about setting up and using the
AiRScouter, as well as detailed tips for troubleshooting problems that
may occur.
User's Guide (available online at Brother Solutions Center)
This guide provides additional information on settings,
operation, troubleshooting, and maintenance. Visit
the Brother Solutions Center at support.brother.com,
select Manuals, and search for your product.
Unpack the machine and check the
components
Before using the AiRScouter, make sure that you have all the
components shown below.
*1
Head Display Unit
Cable Clip
Rear Band
Flexible Arm
Quick Setup Guide
Product Safety Guide
(For Right Eye)
(This Guide)
Large Eyecup
*2
Case
*1 The cable clip may be used to attach the head display cable to your
clothing to keep it out of your way. Loop the string of the cable clip around
the head display cable as shown.
*2 The case is used for storage only. If the product falls or receives a strong
impact while in the case, it may become damaged.
Names and functions of key components
Head Display
b
c
a
a Focus Adjustment Dial
Adjusts the focus of the image on the head display by changing the
focal length of the optics (from 30 cm to infinity).
b Head Display Cable
Connects the head display to the control box and transmits power
and video signals to the head display.
c Eyecup
When attached, prevents the head display from touching the user’s
eye.
Harness
a
b
c
f
d
e
a Head Band
Attaches the AiRScouter to the user’s head and distributes the
weight of the unit.
b Forehead Pad
Cushions the head band and prevents it from slipping down the
user’s forehead.
c Cable Channel
Holds the head display cable in place along the head band.
d Rear Band Attachment Post
Allows the user to attach the rear band and tighten the head band
around the head to prevent slippage.
e Flexible Arm
Allows the user to adjust the position and angle of the head display
relative to the eye.
f Joint Dial
Loosens the ball joint to allow for adjustment of the flexible arm, or
tightens it to fix the flexible arm's position and angle.
Advertisement
Related Manuals for Brother AIRScouter WD-350B
Summary of Contents for Brother AIRScouter WD-350B
- Page 1 This guide provides basic information about setting up and using the AiRScouter, as well as detailed tips for troubleshooting problems that may occur. User's Guide (available online at Brother Solutions Center) This guide provides additional information on settings, operation, troubleshooting, and maintenance. Visit the Brother Solutions Center at support.brother.com,...
-
Page 2: Control Box
Before using the AiRScouter Control Box How to assemble the AiRScouter The AiRScouter is powered by an external source, such as a third party USB battery, that is connected to the micro-USB port on the control box. Before connecting an external battery to the control box, ensure that the external battery has been fully charged. -
Page 3: Adjusting The Display
Adjusting the display How to wear the AiRScouter Turn the power on Press the power button to turn the AiRScouter on. (The LED will turn Place the head band onto the head as shown. The band should be orange.) positioned just above the forehead. Note Adjust the position of the Head Display If the head band feels loose or starts to slip down the forehead, attach... -
Page 4: Adjusting The Settings
Adjusting the settings Adjust brightness Attach the rear band Press the brightness button on the side of control box to adjust the Press the area highlighted in the image below, and slide the head band brightness of the image on the head display. There are five levels of cover towards the end of the band to remove it. -
Page 5: Switch The Head Display To Be Viewed With The Right Eye
Switch the head display to be viewed with Attach the flexible arm for right-eyed viewing (the other arm that is included in the box) to the head display by lining up the narrow end of the right eye the flexible arm with the threads on the head display, and rotating the dial on the ball joint clockwise to tighten. -
Page 6: Replace The Eyecup
Replace the Eyecup Depending on your task or environment, you may want to replace the small eyecup attached to the head display with the large eyecup that is included in the box. The large eyecup will isolate your eye and the screen from your working environment. -
Page 7: Troubleshooting
(two years for printed or does not materials). fill the whole screen. For FAQs, troubleshooting and more, visit the Brother Solutions Center at support.brother.com The image Is there dirt on the Clean the lens of the head...