Dust Collection - Ryobi JM82 Operator's Manual

KNOW YOUR BISCUIT JOINER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
SWITCH TRIGGER
The biscuit joiner has a conveniently located ON/OFF switch
trigger on the underside of the dual grip handle.
CARBIDE-TIPPED BLADE
The biscuit joiner has an 8-tooth carbide-tipped blade for
cutting biscuit slots.
NON-SKID SURFACE
The fence on the biscuit joiner has a non-skid surface to help
prevent misalignment caused by skidding during use. It also
prevents marring of the workpiece when making cuts.
DEPTH ADJUSTMENT KNOB
A spring-loaded depth adjustment knob makes it possible to
make proper settings for three standard size biscuits.
HEIGHT SETTING SCALE
A scale on each side of the fence indicates the height of the
fence from the center of the blade.
HEIGHT ADJUSTMENT KNOB
The height adjustment knob moves the adjustable fence up
or down to adjust the height of the fence from the center
of the blade.
LOCKING KNOB
The locking knob loosens the adjustable fence and allows
movement of the height adjustment knob.
FEATURES
ANGLE SETTING SCALE
The adjustable fence on the biscuit joiner can be set at
angles from 0° to 135°.
DUAL GRIP HANDLE
The dual grip handle offers a choice of two grip positions
for operator comfort.

DUST COLLECTION

Wood particles are drawn up through a tunnel in the base
and collect in the dust bag during cutting operations. The
dust bag can be removed and a 1-1/4 in. vacuum can be
attached to the dust port.
LINE OF CUT INDICATOR
Centerline and cut indicator marks help the operator make
more accurate cuts.
ADJUSTABLE FENCE
The biscuit joiner has an adjustable fence for setting the
angle from 0° to 135°, with positive stop settings in incre-
ments of 45°. The height of the fence can be set between
0 in. - 2 in.
The adjustable fence should always be used to guide and
balance the biscuit joiner, providing ease of operation and
maintaining control.
BISCUITS
Biscuits swell rapidly upon contact with water-based wood-
working glues. They are available in three standard sizes:
#0
#10
#20
This biscuit joiner is packaged with 20 #10 biscuits.
9
(5/8 in. x 1-13/16 in.)
(13/16 in. x 2-1/16 in.)
(15/16 in. x 2-5/16 in.)