Panasonic TC-P50S60 Technical Manual page 85

Troubleshooting 6 Blinks Failure (TC-P**S60)
Applies to Models
TC-P42S60
TC-P50S60
TC-P55S60
TC-P60S60
TC-P65S60
Verify that all the cables on the SC/SN board are
properly seated. Also check the ribbon cables and
connectors on the A and C boards. Unplug the TV
and disconnect connector SC20 on the SC board
(SN20 for TC-P42S60). Plug in the TV.
power LED does not turn on automatically after
the TV is plugged in as expected, then press the
power switch.
No
Replace the A
board
For ST60 models go to
the next page
Start Here
Note: If the
Is the TV taking
Yes
longer (Approx.
11 sec) to
shutdown?
Blink List of boards likely to cause this symptom.
Code
No.1
6 Blinks SN (42")
SC(50"55"/60"/65")
TC-P42S60
SN
SN
SN20
TC-P42S60
Replace the SN
board
No.2 No.3 No.4
A
PSS PSS
A
A
All others S60 models
Replace the SC
board
Slide 85 Slide 85