Waycon LLD-RS232 User Manual page 14

Once the third dialog box has been confirmed, the terminal window opens. Its status bar in the lower left corner
should display "Connected". With the LLD powered and operational, commands can now be input, for example
ID.
Note:
A currently entered command will only be displayed if "Local echo" is enabled. This function can be accessed 
via File menu  File Properties  "Settings" tag  ASCII Setup.
Figure 10: Establishing communication with the hyper terminal: ID input
Once this command has been triggered by pressing the Enter key, the LLD should display its online help in
response.
Figure 11: Establishing communication with the hyper terminal: LLD response
Before terminating a hyper terminal session, the software queries if you really want communication abandoned.
This query must be acknowledged.
Figure 12: Establishing communication with the hyper terminal: disconnect query box
14