Micron T 2052 Operating Instructions

Combination 60w soldering & 90w vacuum desoldering station

Advertisement

Quick Links

Altronic Distributors warrants this product for two years from the date of purchase from Altronics or its
resellers to the consumer.
During the warranty period, we undertake to repair or replace your product at no charge if found to be
defective due to a manufacturing fault. The warranty excludes damage by misuse or incorrect instal-
lation (i.e. failure to install and operate device according to specifications in the supplied instruction
manual), neglect, shipping accident, or no fault found, nor by use in a way or manner not intended by
the supplier.
For repair or service please contact your PLACE OF PURCHASE.
If this item was purchased directly from Altronics please make a warranty claim by:
1. FOR MAIL ORDER CUSTOMERS (includes school and trade orders),
a) Ringing us on 1300 797 007 and quoting your tax invoice number.
b) Upon contacting Altronics, we will issue an R.A. (Return Authorisation).
As Altronics have a number of service agents throughout Australia,
a copy of the R.A. will be emailed, faxed or mailed to you with full instructions
of how and where to send the goods. The freight for shipping goods back to
Altronics for all repairs is at the customers expense.
c)
A copy of the R.A. form, (or at the very minimum, the R.A. number) must
accompany the goods to effect the repair.
d) Altronics will pay the return freight to the customer where the warranty claim
has been accepted.
e) Please quote the R.A. number in any correspondence to us.
2. FOR OVER THE COUNTER PURCHASES; to make a warranty claim,
please return the goods to us in any of our stores, with a copy of your
proof of purchase (tax invoice).
a) Upon leaving the goods at one of our stores, an R.A. number
will be issued to you.
b) Once repaired, you will be contacted, advising that the goods are ready to be
collected from the store.
It is at Altronics discretion as to whether the goods will be repaired or replaced (whilst under warranty);
and as to whether identical goods will be used to replace the item due to changes of models / prod-
ucts.
Note: Under no circumstances should you attempt to repair the device yourself or via a service centre
not authorised by altronics, as this will invalidate the warranty!
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and for compensation for any other reason-
ably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Distributed by Altronic Distributors Pty. Ltd.
Phone: 1300 780 999 Fax: 1300 790 999
Internet: www.altronics.com.au
T 2052 Combination 60W Soldering & 90W
Vacuum Desoldering Station
Operating Instructions
• Temperature adjustable
• Dual backlit LCD screens
• Easy clean solder reservoir
• High suction vacuum pump
• Includes three tips and nozzle cleaners
• Stand with integrated tip cleaners
• Suitable for ROHS compliant soldering
• Burn proof rubber leads

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T 2052 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Micron T 2052

  • Page 1 T 2052 Combination 60W Soldering & 90W For repair or service please contact your PLACE OF PURCHASE. Vacuum Desoldering Station If this item was purchased directly from Altronics please make a warranty claim by: 1.
  • Page 2: Product Description

    Overview Notes: Thank you for purchasing the T 2052 soldering station – a great solution for your soldering equipment needs! We believe that you will be more than satisfied with the many features and the versatility of your new soldering station.
  • Page 3: Operating Instructions

    MICRON MICRON Notes: Digital Display 1. Tip Temperature 2. Setting Temperature. By pressing the “UP” or “DOWN” button a user can switch the digital display to the set point display. The set-point can be changed in steps of ±1°C by tapping the “UP” or “DOWN” button.
  • Page 4 5. When the glass tube has absorbed about 1/2 solder waste, please clean it immediately. When you find the • Please turn off the power before connecting or disconnecting the soldering iron. filter is becoming clogged up, please replace the filter. T 2052 Specifications Input:............................220 - 240V AC Heater:..........................24V ceramic element Soldering nominal power: ...........................

Table of Contents