Table of Contents
Advertisement
ST2-XM2 OPERATION
ST2-KP KEYPAD CONTROLS
ST2-KP Keypad Operation
1
Turning the keypad on/off
To activate the ST2-KP, press
power down the keypad display. The keypad remains
powered until the ST2-XM2 Tuner is turned off.
1
Selecting the desired tuner
To select a different tuner, press and hold
keypad has been hardware jumper-selected to Tuner
1 or Tuner 2, it will not switch between the two
tuners.) The backlight color of the display will be
green for Tuner 1 (XM1) and amber for Tuner 2
(XM2). Each time a tuner is selected the display will
refresh with the current station or preset for that
tuner, and all subsequent button presses and memo-
ry preset entries will be associated with that selected
tuner.
2
Selecting an XM mode
Push
to select an XM operating mode.
2
Exiting an XM mode
Press and release
the XM operating mode menu.
3
Selecting the desired channel
Use
and
for manual tuning. To move quickly
through the channels, press and hold either
for more than 1.5 seconds.
4
Selecting a Bank
To select a bank, select the desired tuner, then press
and hold
or
to select the desired bank. The
bank name will show on the display.
20
. Press
to
. (If the
until EXIT is displayed to exit
or
4
Recalling a Memory Preset
To recall a memory preset, press and release
to scroll through the presets for the selected
bank. (Memory presets must be stored for ST2-KP
recall)
5
ST2-KP Keypad Display
The 5-character backlit display shows XM channel
and mode information. Messages scroll twice, then
display the first 5 characters.
ST2-KP Keypad-Front Panel
4
or
5
3
2
3
1
Advertisement
Table of Contents
