Installing Wheel Guard/Parking Brake - Halfords Bike Trailer Owner's Manual

Step 5 – Installing wheel guard/parking brake
Your trailer is equipped with a combination wheel guard and parking brake for added safety. The
wheel guard helps to deflect the tire from obstructions that might stop the trailer and result in an
accident.
Installing the wheel guard
Installation
1. Unpack polybag and check that all parts are included
2. located the 2 holes in the front of the side frame, just in front of the wheel.
3. Place screws through holes in frame – from inside to outside.
4. Place the Wheel Guard Assembly against the frame, and use the hex key wrench
provided to tighten the screws until snug. Note: The nut is secured inside so
you will not need a wrench or plier to hold the nut while tightening the fixing
screw.
10
Parts list
1. Hex Key
2. Screws
3. Wheel guard
1 ea
4 ea
1 set