Installation; Unpacking; Electrical Requirements; Environmental Requirements - Contech CT series User Manual

INSTALLATION

1 Unpacking:

Unpack the scale. Save the packing container for future use.

2 Electrical requirements:

The scale requires very stable power. It works on 230V AC supply with PROPER EARTHING. The
power outlet used for the scale should not be shared with any other devices which draws current in
inconsistent manner like Airconditioner or refrigerator etc. Scales supplied with optional inbuilt
battery backup

3 Environmental requirements:

For best results, the scale should be placed on a level surface which is free from drafts. It should not
be exposed to direct sunlight or radiated heat. The scale should not be subjected to sudden ambient
temperature changes. Table used for scale should be sturdy and should not transmit vibration from
other equipments and free from the movement of people. No vibration producing equipment should
be operated on the same platform as scale.
4 Start up.
Power is supplied to the scale through a 2 pin dc adaptor supplied along with the scale. Connect the
adaptor to the scale to dc jack provided at the side of the scale. Connect the adaptor to an AC mains
outlet with proper earthing.
Scale goes through the self test and subsequently starts displaying weight
Press key to zero the weight, if required.