Check Counting; To Set Limits - Contech CT series User Manual

Press key to clear all the memory.
Press key to quit.

CHECK COUNTING.

Scales can be used in check counting application, where user can set limits ( 1 or 2) for counting.
Once the set limit is reached, scale gives audio indication. 1 or 2 limits can be set based on the
requirement.
In case of Single limit, Once the set limit is reached scale emits beep sound.
In case of 2 limits, scale emits beep sound once the count is within the 2 set limits.

To set limits,

Press key for more than 3 seconds, Scale displays
It displays in Unit Wt. Display position, if set limit function is OFF. or
displays in Unit Wt. Display position, if set limit function is ON.