Setup Functions; Menu Name Function Options; Factory Setting; Auto Zero Setting - Contech CT series User Manual

following commands.
Z
- Tares the balance. (Make weight and count reading zero)
T
- Tares the balance. (Make weight and count reading zero)
– Request for weighing and counting data
W1
However scale can be operated in a continous data transfer mode
continuously as it measures. This can be set using scale keyboard.
SETUP functions control the basic operation of the SCALE. These parameters can be set by the user
to suit the requirements. The following are the parameters.

MENU NAME FUNCTION OPTIONS

Factory setting

(Ability of the scale to remain
at zero, when there is no weight
on the pan. )

SETUP FUNCTIONS

Baud rate setting
Print modes set.

Auto zero setting.

when it will send data
DESCRIPTION
To select factory set parameters.
To select 2400 baud rate
To select 4800 baud rate
Send stable weight through serial port
when key is pressed.
Send weight through serial port
Every time scale reading becomes
stable.
Send weight continuously.
Autozero disabled.
Autozero to half accuracy of scale.
Autozero to full accuracy of scale.
Autozero to twice the accuracy of scale.