Good Vibrations
Good Vibrations
Deluxe Gym
Deluxe Gym
641428/641435
ADULT ASSEMBLY AND BATTERY INSTALLATION REQUIRED.
E. 1 lower right arch
I. 1 bolster pillow
A. 1 mat
J. 1 toucan
B. 1 left base with extension
F. 1 top arch
G. 1 left base arch
K. 1 mirror attachment
C. 1 right base
L. 1 turtle attachment
D. 1 lower left arch
H. 1 right base arch
Illustrations are for reference only. Styles may vary from actual contents.
NOT INCLUDED:
Phillips Screwdriver
A.
B.
D.
E.
G.
I.
J.
L.
M.
N.
TOUCAN BATTERY INSTALLATION
Before playing, an adult must install fresh alkaline
™
™
batteries in the toucan. Here's how:
AGES 0+ MONTHS
1. Open the hook and loop fastener on the back of the
ADULT SUPERVISION REQUIRED.
toucan.
2. Using a Phillips screwdriver (not included) remove
the screw and battery compartment cover from the
back of the toucan.
3. Install three (3) fresh 1.5V AA (LR6) alkaline batteries
M. 1 aligator attachment
(not included) in the bird making sure the (+)and (-)
N. 1 sh attachment
ends face the proper direction as indicated inside the
O. 1 crinkle leaves attachment
battery compartment.
4. Replace the compartment cover and tighten the
screw.
5. Close the hook and loop fastener to conceal the
battery compartment.
P. x 6
C.
1
F.
H.
Attach the left base arch (G) to the left base with extension (B) and secure with one screw (P).
3
B
K.
O.
3 x AA Batteries
P. x 1
B
G
C
G
H
Connect the left base arch (G) and the right base arch (H).
BASE BATTERY INSTALLATION
Before playing, an adult must install fresh
alkaline batteries in the left base with extension.
Here's how:
1. Using a Phillips screwdriver (not included)
remove the screw and battery compartment
cover from the left base.
2. Install three (3) fresh 1.5V AA (LR6) alkaline
batteries (not included) in the base making
sure the (+)and (-) ends face the proper
direction as indicated inside the battery
compartment.
3. Replace the compartment cover and tighten
the screw.
3 x AA Batteries
1.5V AA/LR6
1.5V AA/LR6
1.5V AA/LR6
ASSEMBLY INSTRUCTIONS
2
B
H
Attach the right base arch (H) to the right base (C)
and secure with one screw (P).
4
D
B
Insert the lower left arch (D) into the opening on the left base (B) until it snaps in place. Then,
snap the lower right arch (E) into the right base (C). Secure each side with one screw (P).
NOTE: Once assembled, the lower arches cannot be removed.
P. x 1
C
P. x 2
E
C