Sony CDP-M333ES Service Manual page 16

Hide thumbs Also See for CDP-M333ES:

Enlarged version

Sensor Adjustment

Enter the adjustment mode and select "Mech Adjust" with the

DISC/CHARACTER knob rotate, and press the knob.

Press the GROUP 1 button to operate the loading mechanism,

and continue pressing until the disc table locks. (Fig-3)

Loosen the fixing screw and move the holder so that

both

button LED (green) and the ARTIST MODE button

LED (green) light.

If the holder is not in the correct position, the MEGA

CTRL button LED (orange) or the

lights.

Moving the disc table right and left with a hand after the screw

is fixed, the table will move by the play of a disc table. If the

LEDs light up alternately, the adjustment will be performed

correctly. (Fig-4)

button LED (orange)

ARTIST MODE

MEGA CTRL

At this position,this

part will be locked.

holder (table sensor 400)

S tight, screw

(PTTWH 3 × 6)

table (400ES) ass'y

swing

Table of Contents

Show Quick Links

Cdp-m555es