Table of Contents
Advertisement
Introduction
Thank you for purchasing the MFJ-1886 receive loop antenna. You new antenna is composed of
High strength material for excellent rigidly and light weight. The MFJ-1886 is compact and excellent
for restricted space or portable installations. The MFJ-1886 antenna frequency range extends from 30Mhz
all the way down into the 500 Khz AM Broadcast bands The antenna has strong null points and a rotator is
recommended for seeking out weak stations by eliminating noise or other stations. It can be mounted on
a tripod for temporary locations or any mast 1-3/4 diameter or smaller for permanent installation.
Preparation
This antenna is fully assembled and ready to mount. Pick a mounting location well away from any
other transmitting antennas. Transmitting signals close to the MFJ-1886TR will damage the internal
amplifier. This antenna can be used indoors if desired. Rotating the antenna by hand is a good way
to null noise or other broadcast stations in the area. Indoor locations tend to have more noise sources
than outdoor locations so keep that in mind if you decide to use the antenna inside.
In the box
1. Loop Antenna
2. TR Bias Tee
3. Power Supply
4. U-bolts
WARNING
Never mount or move any antenna where it can come into contact
with power lines. If this antenna comes into contact with power
lines, it can KILL you. Never mount any antenna where if it falls
it could come into contact with power lines.
POWER
Bias-Tee with
ON
Transmit/Receive
OFF
Antenna Switch
MFJ-4113TR
KEEP THIS ANTENNA
AWAY FROM POWER LINES
Advertisement
Table of Contents
