Roland FP-5 Manual page 4

Universal Realtime System Exclusive Messages
Master Volume
Status Data byte
F0H 7FH, 7FH, 04H, 01H, llH, mmH
Byte Explanation
F0H Exclusive status
7FH ID number (universal realtime message)
7FH Device ID (Broadcast)
04H Sub ID#1 (Device Control messages)
01H Sub ID#2 (Master Volume)
llH Master Volume lower byte
mmH Master Volume upper byte
F7H EOX (End Of Exclusive)
The lower byte (llH) of Master Volume will be handled as 00H.
Master Fine Tuning
Status Data byte
F0H 7FH, 7FH, 04H, 03H, llH, mmH
Byte Explanation
F0H Exclusive status
7FH ID number (universal realtime message)
7FH Device ID (Broadcast)
04H Sub ID#1 (Device Control)
03H Sub ID#2 (Master Fine Tuning)
llH Master Fine Tuning LSB
mmH Master Fine Tuning MSB
F7H EOX (End Of Exclusive)
mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.9 [cents])
* Not received on Tone Wheel Organ.
Master Coarse Tuning
Status Data byte
F0H 7FH, 7FH, 04H, 04H, llH, mmH
Byte Explanation
F0H Exclusive status
7FH ID number (universal realtime message)
7FH Device ID (Broadcast)
04H Sub ID#1 (Device Control)
04H Sub ID#2 (Master Coarse Tuning)
llH Master Coarse Tuning LSB
mmH Master Coarse Tuning MSB
F7H EOX (End Of Exclusive)
llH: ignored (processed as 00H)
mmH: 28H - 40H - 58H (-24 - 0 - +24 [semitones])
* Not received on Tone Wheel Organ.
Global Parameter Control
Reverb Parameters
Status Data byte
F0H 7FH, 7FH, 04H, 05H, 01H, 01H,
01H, 01H, 01H, ppH, vvH
Byte Explanation
F0H Exclusive status
7FH ID number (universal realtime message)
7FH Device ID (Broadcast)
04H Sub ID#1 (Device Control)
05H Sub ID#2 (Global Parameter Control)
01H Slot path length
01H Parameter ID width
01H Value width
01H Slot path MSB
01H Slot path LSB (Effect 0101: Reverb)
ppH Parameter to be controlled.
vvH Value for the parameter.
pp=0 Reverb Type
vv = 00H Small Room
vv = 01H Medium Room
vv = 02H Large Room
vv = 03H Medium Hall
vv = 04H Large Hall
vv = 08H Plate
pp=1 Reverb Time
6
F7H
Status
F7H
Status
F0H
Byte
F0H
7FH
7FH
04H
05H
01H
01H
01H
01H
02H
Status
ppH
F7H
vvH
Status
F7H
F7H
Status
F0H
Byte
F0H
7FH
7FH
09H
01H
0nH
ppH
rrH
Status
F7H
F7H
* This MIDI message will change on GM2 Tones only.
Status
F0H
Byte
F0H
7FH
7FH
09H
03H
0nH
vv = 00H - 7FH 0 - 127
EOX (End Of Exclusive)
Chorus Parameters
Data byte
7FH, 7FH, 04H, 05H, 01H, 01H,
01H, 01H, 02H, ppH, vvH
Explanation
Exclusive status
ID number (universal realtime message)
Device ID (Broadcast)
Sub ID#1 (Device Control)
Sub ID#2 (Global Parameter Control)
Slot path length
Parameter width
Value width
Slot path MSB
Slot path LSB (Effect 0102: Chorus)
Parameter to be controlled.
Value for the parameter.
pp=0 Chorus Type
vv=0 Chorus1
vv=1 Chorus2
vv=2 Chorus3
vv=3 Chorus4
vv=4 FB Chorus
vv=5 Flanger
pp=1 Mod Rate
vv= 00H - 7FH 0 - 127
pp=2 Mod Depth
vv = 00H - 7FH 0 - 127
pp=3 Feedback
vv = 00H - 7FH 0 - 127
pp=4 Send To Reverb
vv = 00H - 7FH 0 - 127
EOX (End Of Exclusive)
Channel Pressure
Data byte
7FH, 7FH, 09H, 01H, 0nH, ppH, rrH
Explanation
Exclusive status
ID number (universal realtime message)
Device ID (Broadcast)
Sub ID#1 (Controller Destination Setting)
Sub ID#2 (Channel Pressure)
MIDI Channel (00 - 0F)
Controlled parameter
Controlled range
pp=0 Pitch Control
rr = 28H - 58H -24 - +24 [semitones]
pp=1 Filter Cutoff Control
rr = 00H - 7FH -9600 - +9450 [cents]
pp=2 Amplitude Control
rr = 00H - 7FH 0 - 200%
pp=3 LFO Pitch Depth
rr = 00H - 7FH 0 - 600 [cents]
pp=4 LFO Filter Depth
rr = 00H - 7FH 0 - 2400 [cents]
pp=5 LFO Amplitude Depth
rr = 00H - 7FH 0 - 100%
EOX (End Of Exclusive)
Controller
Data byte
7FH, 7FH, 09H, 03H, 0nH, ccH, ppH, rrH F7H
Explanation
Exclusive status
ID number (universal realtime message)
Device ID (Broadcast)
Sub ID#1 (Controller Destination Setting)
Sub ID#2 (Control Change)
MIDI Channel (00 - 0F)
Status
F7H
Status
F7H
Status