How It Works; Working Principles; Safe Riding; Getting On And Off - Jetson V6 Manual

WORKING PRINCIPLES

The V6 uses Active Balance Technology and acceleration sensors to control balance intelligently,
depending on a center of gravity. Built-in inertia dynamic stabilization systems maintain the
direction of forwards and backwards, however, it cannot guarantee the stability of left and right.
When you ride, be sure to shift your weight to overcome centrifugal force and improve turning
safety.

SAFE RIDING

• Always wear comfortable clothes and closed-toe, flat shoes. Use the V6 in a spacious
area and ensure that there are no significant obstacles in the way. Make sure the charger is
unplugged before riding the V6. Clothing should not be so loose that a garment may be
caught on a passing object or in the wheels; this could result in loss of control and
personal injury. The V6 is intended to use indoors or on smooth, flat surfaces.
• The Power Button is located on the back of the device, next to the Charging Port. Press it
until you hear the V6 beep to turn it on or off.
• The range of the V6 is dependent upon the way you use it. The battery will run out
quicker if you ride at high speeds and/or up or down an incline.

GETTING ON AND OFF

• Be careful getting on and off the V6. Always step forward when getting on the V6
and step backward when getting off. Getting on and off the V6 in any other manner may
result in a fall.
• Set the V6 on flat ground and turn the power on.
• Put one foot on the mat and the green light on top of the unit will light up.
• Lift your other foot slowly and place it on the other mat.
• When standing on the V6, keep your feet shoulder-width apart. Do not stand on the
center portion of the V6. Keep a relaxed, upright posture, with your knees slightly bent.
• After standing up successfully, remain upright and maintain your balance to keep the
V6 stationary.
• Shift your body weight gradually to pick up speed. Do not lunge forward or backward.
Slight movements will pick up speed, so be cautious as you become accustomed to
the V6.
• When you are ready to get off the V6, come to a complete stop by getting to an
upright and stationary position.
• Step off with one foot first behind the unit and then step down with the other.
• Once you are safely off, power down the V6. If you do not turn it off, it will stay on for
10 minutes allowing you to step on and go again without engaging the Power Button. The
V6 will shut off automatically after 10 minutes.

HOW IT WORKS