Ha100 Connection; Powering And Connecting Ha100; Figure 7: Basic Connection Setup Of The Ha100 - Grandstream Networks HA100 User Manual

HA100 CONNECTION

This section provides the connection types and steps needed for connecting the HA100 with 2 UCM6510s'.

Powering and Connecting HA100

The external connections are used for the following purposes:
•
Powering up the HA100
•
Network connection
•
PSTN lines connection
•
Analog/Fax connection
•
Digital (T1/E1/J1) connections.
Please refer to the following steps for basic connection setup of the HA100:
1. Connect one end of an Ethernet cable to the WAN port of the HA100 and the other end of the cable
to the uplink of a hub or switch.
2. Connect 12V power adapter to the 12V power port on HA100 and the other end to a power outlet.
Optional Connections
Please refer to the following steps for optional connections on the HA100:
1. For PSTN connection: Connect a PSTN cable to the FXO external port on HA100.
2. For Analog phone/Fax connection: Connect analog phone or FAX machine to the FXS external
port on HA100.
3. For T1/E1/J1 connection: Connect your digital connection cable from the service provider side to
the T1/E1/J1 external port on HA100.

Figure 7: Basic Connection Setup of the HA100

HA100 User Manual
P a g e | 12