INSTALLATION
Before deploying and configuring the HA100, the unit needs to be properly powered up and connected.
This section describes detailed information about the HA100 interfaces and the steps needed for setting up
the HA100.
HA100 Interfaces
The HA100 device has 24 ports, 1 reset button and 1 ground interface.
The 24 ports include 7 pairs of internal ports, 7 external ports, 2 RS485 ports and 1 power port.
HA100 Back Panel
The following image illustrates the back panel of the HA100 containing the external ports:
The back panel contains the following ports:
•
2 FXS ports.
•
2 FXO ports.
•
1 WAN port.
•
1 LAN port.
•
1 T1/E1/J1 port.
•
2 RS-485 ports.
HA100 Front Panel
The following image illustrates the front panel of the HA100 containing the internal ports:
RS-485
2 x FXS
Ports
Ports
Figure 3: HA100 Back Panel
HA100 User Manual
2 x FXO
LAN
WAN
Ports
Port
Port
T1/E1/J1
Power Port
Ports
(12V)
Ground
P a g e
|
10