Power Led Blinking Timing Chart; No Power - Panasonic TX-LR32EM5A Service Manual

TX-LR32EM5A
6.2.

Power LED Blinking timing chart

1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality occurs, the protection circuit will operate and reset the unit to stand by mode. During this time, the
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
6.3.

No Power

First check point
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
No Name
1 BL_SOS
2 TV_SOS
3 SOUND_SOS
Factor
SOS from PANEL inverter
SOS from POWER Curcuit
SOS from audio AMP
12
R_LED Blink
1
3
9