Table of Contents
Advertisement
TX-LR32EM5A
5.2.5.
Self Check Mode
1. Press the 'MENU' button (on the remote control) and the 'VOL DOWN' button on the LCD panel.
2. Press ON/OFF button on the panel to Exit.
5.2.6.
Self Check (Device)
TUN
MEM
EEPROM
SOFT
MODEL ID
5.2.7.
Hotel Mode Adjustment
1. Press the 'VOLUME DOWN' button on the TV panel and simultaneously press the INPUT button on the remote control 3
times to enter Hotel Mode.
2. Set Hotel mode 'on/off', then press 'EXIT' to come out.
5.2.8.
Hotel Mode
1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu, please
enter the following command (within 2 second).
[TV] : Vol [Down] + [REMOTE] : INPUT (3 times).
Then, the Hotel mode setup menu is displayed.
3. To exit the Hotel mode setup menu
Disconnect AC power cord from wall outlet.
4. Explain the Hotel mode setup menu
Item
yes
yes
yes
yes
yes
NOTE: After self check, the following process need to follow.
Item
Function
Mode
Select hotel mode off/on
Input
Select input signal modes.
Set the input, when each time power is switched
on.
Selection :
-/RF/HDMI1/HDMI2/HDMI3/Component/
Video/PC
• Off: give priority to a last memory.
Channel
Select channel when input signal is RF.
Set the channel, each time power is switched
on.
Selection :
Any channel number or [-].
[-] means the channel when turns off.
Volume
Adjust the volume when each time power is
switched on.
Range :
0 to 100
Vol. Max
Adjust maximum volume.
Range :
0 to 100
OSD Ctrl
Restrict the OSD.
Selection :
OFF/PATTERN1
• OFF: No restriction
• PATTERN1: restriction
FP Ctrl
Select front key conditions.
Selection :
OFF/PATTERN1/ALL
• OFF: altogether valid.
• PATTERN1: only input key is valid.
• ALL: altogether invalid.
Pow Ctrl
Select POWER-ON/OFF condition when AC
power cord is disconnected and then connected.
OFF: The same condition when AC power
cord is disconnected.
ON: Forced power ON condition.
10
Hide quick links:
Advertisement
Table of Contents
