Table of Contents
Advertisement
ln-status mac-stats mac-tx-success 11424
ln-status mac-stats mac-tx-queue-full 0
ln-status mac-stats mac-tx-error 0
ln-status mac-stats mac-tx-retry 0
ln-status mac-stats mac-rx-success 13390
ln-status mac-stats mac-rx-error 1
ln-status ap-info ap-address 00:06:3d:09:0d:d8
ln-status ap-info ip-address 192.168.1.51
ln-status ap-info connected-time 226
ln-status ap-info rssi -68
ln-status ap-info evm 0
ln-status ap-info rx-modulation qpsk
ln-status last-rx-packet last-rssi -68
ln-status last-rx-packet last-evm 0
ln-status hardware-info serial-number 2661832
ln-status hardware-info hardware-id 0
ln-status hardware-info hardware-revision 0
ln-status test test-mode-time 0
ln-status test test-state stop
Ensure the CLI is in operational mode.
To enter Test Mode and key the transmitter for 5 minutes:
> request interfaces-state interface lnms ln-status test-mode state keyed time 5
To enter Test Mode's receive state for 5 minutes:
> request interfaces-state interface lnms ln-status test-mode state receive time 5
To exit Test Mode:
> request interfaces-state interface lnms ln-status test-mode state stop
To display the current test state:
> show interfaces-state interface lnms ln-status test
92
Test Mode
MDS™ Master Station
MDS 05-6399A01, Rev. F
Advertisement
Table of Contents
