Table of Contents
Advertisement
If you wish to...
Create a bridge
Add the ETH1 interface to a
bridge
Remove the ETH1 interface
from a bridge
View LNMS settings
Monitor LNMS Status
(RSSI,EVM, etc)
Configure LNMS
Frequencies
Configure LNMS Radio
Power
View SDMS Settings
Monitor SDMS Status (RSSI,
SNR, etc)
Configure SDMS
Frequencies
Configure SDMS Modem
Configure the SDMS Radio
Mode
Configure SDMS Radio
Power
Key/Dkey the SDMS Radio
Send a Remote Maintenance
Request to Remotes
View the routing table
View the event log
Set the admin user's
password
Set the device name
Set the baud rate on COM1
Download a firmware
package from TFTP server at
192.168.1.10
Monitor firmware download
status
Export configuration file to a
TFTP server at 192.168.1.10
MDS 05-6399A01, Rev. F
Table 5-1. CLI Quick Reference Table
% set interfaces interface bridge type bridge
% set interfaces interface bridge bridge-settings members port eth-0/0/0
% delete interfaces interface bridge bridge-settings members port eth-
0/0/0
> show configuration interfaces interface lnms ln-config
> show interfaces-state interface lnms ln-status | repeat 5
NOTE: pressing ctrl-c will abort this command
% set interfaces interface lnms ln-config rx-frequency <value>
and/or
% set interfaces interface lnms ln-config tx-frequency <value>
% set interfaces interface lnms ln-config power <value>
> show configuration interfaces interface sdms sd-config
> show interfaces-state interface sdms sd-status | repeat 5
NOTE: pressing ctrl-c will abort this command
% set interfaces interface sdms sd-config radio-config basic-config
receive-frequency <value>
and/or
% set interfaces interface sdms sd-config radio-config basic-config
transmit-frequency <value>
% set interfaces interface sdms sd-config radio-config basic-config
modem-type <modem>
% set interfaces interface sdms sd-config radio-config basic-config
radio-mode <radio mode>
% set interfaces interface sdms sd-config radio-config basic-config rf-
output-power <value>
> request interfaces interface sdms sd-config maintenance rf-key-test
key radio true/false
> request interfaces interface sdms sd-config maintenance remote-
management-command <command name> <value>
> show routing
> show table logging event-log
> request system authentication change-password user admin
password admin1234
% set system name "Mydevice"
% set services serial ports COM1 baud-rate b19200
> request system firmware reprogram-inactive-image filename sdms-
bkrc-1_0_0.mpk manual-file-server { tftp { address 192.168.1.10 } }
> show system firmware reprogramming-status
> request system configuration-files export filename myConfig.xml
manual-file-server {tftp {address 192.168.1.10} }
MDS™ Master Station
Enter this CLI command:
31
Advertisement
Table of Contents
