GE Grid Solutions MDS Master Station Technical Manual page 87

The following status items appear on both APs and Remotes (unless stated otherwise)
General 
Init Status - State of the NIC Initialization

Current Device Mode – Read-only display of the active mode the lnms is operating.

Alarms - The current NIC alarms:

Firmware Revision - NIC Firmware Revision.

Temperature - The transceiver temperature in degrees C.
Modem Stats

Modem Tx Success – Number of packets successfully transmitted by the modem.

Modem Tx Error – Number of transmit errors reported by the modem.

Modem Rx Success – Number of packets successfully received by the modem.

Modem Rx Error – Number of receive errors reported by the modem.
MAC Stats

MAC Tx Success - Successful transmissions.

MAC Tx Queue Full - Failed transmissions, MAC queue full.

MAC Tx Error - Packets dropped for other reasons.
MDS 05-6399A01, Rev. F
Figure 5-13. Licensed Narrowband (LN) Status
- Off - Not operating
- Initializing - Powering on the NIC
- Discovering - Determining the NIC address
- Reprogramming - Programming the NIC firmware
- Configuring - Configuring the NIC
- Complete - Initialization complete
- synthesizer-out-of-lock: Synthesizer is out of lock. Call GE MDS tech support for assistance.
- radio-not-calibrated: Radio was not calibrated. Call GE MDS tech support for assistance.
internal-temp: The radio's internal temperature exceeds the operating threshold.
-
MDS™ Master Station
83