Page 1
OWNER’S MANUAL LED TV *Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your TV and retain it for future reference. LY33** LY34** LY54** www.lg.com...
TABLE OF CONTENTS TABLE OF CONTENTS LICENSES IR CODES OPEN SOURCE SOFTWARE EXTERNAL CONTROL DEVICE NOTICE SETUP RS-232C Setup Type of Connector: ASSEMBLING AND PREPARING D-Sub 9-Pin Male Unpacking RS-232C Configurations Separate Purchase Communication Parameters Parts and Button Command Reference List - Using the Joystick button Transmission / Receiving Protocol Lifting and Moving the TV...
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using.
Page 5
ASSEMBLING AND PREPARING Remote control, Owner’s manual Cable Holder batteries (AAA) (Depending on model) (See p.22, 23, 24) Power cord Stand Screws Stand Screws (Depending on model) 4EA, M4 x L14 4EA, M4 x L20 (Only 42/47/55/60LY34**, (Only 32LY34**, 32LY54**) 39/42/47/55/60LY54**) (See p.10) (See p.10)
Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. LG Audio Device...
ASSEMBLING AND PREPARING Parts and Button A type : 32/42/47/55/60LY34**, B type : 22/28LY33** (Except for India) 32/39/42/47/55/60LY54** Screen Screen Speakers Speakers Remote control and intelligent sensors (Only LY540H) Remote control sensor Power Indicator Power Indicator Joystick button Joystick button C type : 22/28LY33** (Only India) Screen Speakers...
ASSEMBLING AND PREPARING Using the Joystick button You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right. Basic Functions When the TV is turned off, place your finger on the joystick Power On button and press it once and release it.
ASSEMBLING AND PREPARING Lifting and Moving the TV y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the When moving or lifting the TV, read the following TV as shown in the following illustration. to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
ASSEMBLING AND PREPARING Setting up the TV (Only 22/28LY33**) Image shown may differ from your TV. Attaching the stand (Only 32/42/47/55/60LY34**, 32/39/42/47/55/60LY54**) A Stand Base Stand Base B Stand Base M4 x L14 (Only 42/47/55/60LY34**, 39/42/47/55/60LY54**) M4 x L20 (Only 32LY34**, 32LY54**) CAUTION When attaching the stand to the TV, place...
ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a wall (This feature is not available for all models.) Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation.
We recommend the use of LG’s wall mount 75 x 75 100 x 100 (A x B) bracket. When you do not use LG’s wall mount bracket, Standard M4 X L10 M4 X L10 please use a wall mount bracket where the...
Page 13
The wall mount bracket is not provided. wall, it may fall and result in severe injury. You can obtain additional accessories Use an authorized LG wall mount and from your local dealer. contact the local dealer or qualified y The length of screws may differ personnel.
RF cable (75 Ω). y Any separate cable is not provided. This section on MAKING CONNECTIONS mainly uses diagrams for the 47LY34** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS Adapter Connection Network Setup (Only 22/28LY33**) Wired network connection (Depending on model & country) This TV can be connected to a Pro:Centric server via the LAN port. After making the physi- Power Cord cal connection, the TV needs to be set up for network communication.
MAKING CONNECTIONS Other Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable as shown. Some separate cable is not provided. (Only 32/39/42/47/55/60LY540H) VOLUME CONTROL OPTICAL EXTERNAL DIGITAL...
Page 17
MAKING CONNECTIONS (Only 32/39/42/47/55/60LY540S) OPTICAL EXTERNAL DIGITAL SPEAKER OUT AUDIO OUT RGB IN (PC) RS-232C IN (CONTROL & SERVICE) ANTENNA/ CABLE IN RIGHT LEFT AUDIO OUT RGB OUT(PC) (MONO) VIDEO AUDIO OPTICAL AUDIO IN DVD / Blu-Ray / HD Cable Box DVD / Blu-Ray / HD Cable Box / VCR Digital Audio Systerm...
Page 18
MAKING CONNECTIONS (Only 32/42/47/55/60LY34**) OPTICAL EXTERNAL DIGITAL SPEAKER OUT AUDIO OUT RGB IN (PC) RS-232C IN (CONTROL & SERVICE) ANTENNA/ CABLE IN RIGHT LEFT AUDIO OUT RGB OUT(PC) (MONO) VIDEO AUDIO OPTICAL AUDIO IN DVD / Blu-Ray / HD Cable Box DVD / Blu-Ray / HD Cable Box / VCR Digital Audio Systerm...
Page 19
MAKING CONNECTIONS (Only 32/42/47/55/60LY34**, 32/39/42/47/55/60LY54**) MHL passive cable Mobile Phone Headphone HDMI DVI OUT AUDIO OUT Blu-Ray / HD STB / HD Cable Box / DVD / PC...
Page 20
MAKING CONNECTIONS (Only 22/28LY33**) RIGHT LEFT EXTERNAL OPTICAL SPEAKER DIGITAL AUDIO OUT RS-232C IN RGB IN (PC) (CONTROL & SERVICE) ANTENNA /CABLE IN COMPONENT IN DC-IN (19V (MONO) COMPONENT IN COMPONENT IN COMPONENT IN (MONO) (MONO) (MONO) AUDIO OUT RGB OUT(PC) OPTICAL AUDIO IN VIDEO...
Page 21
MAKING CONNECTIONS (Only 22/28LY33**) MHL passive cable Mobile Phone COMPONENT IN (MONO) Headphone HDMI DVI OUT AUDIO OUT Blu-Ray / HD STB / HD Cable Box / DVD / PC...
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover.
Page 23
REMOTE CONTROL (Depending on model) (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. RATIO INPUT SUBTITLE Recalls your preferred subtitle in digital mode. AV MODE Selects an AV mode. RATIO Resizes an image. AV MODE INPUT Changes the input source.
Page 24
REMOTE CONTROL (Depending on model) (POWER) Turns the TV on or off. ꕊ ENERGY SAVING Adjusts the brightness of the screen to ENERGY AV MODE INPUT reduce energy consumption. AV MODE Selects an AV mode. SAVING INPUT Changes the input source. TV/RAD Selects Radio, TV and DTV programme.
MAINTENANCE MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
TROUBLESHOOTING TROUBLESHOOTING The software version can be updated for improvement in performance.Customer needs to ensure the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload revised software version according to the guidance provided by LGE. Problem Solution Check the remote control sensor on the product and try...
961 x 567 x 55.5 Weight With stand (kg) Without stand (kg) Power requirement AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz 47LY34** 55LY34** MODELS 47LY340C-TA 55LY340C-TA Dimensions With stand (mm) 1073 x 676 x 247...
Page 28
SPECIFICATIONS 60LY34** 32LY54** MODELS 32LY540H-TA 60LY340C-TA 32LY540S-TA Dimensions With stand (mm) 1373 x 851 x 283 732 x 481 x 207 (W x H x D) Without stand (mm) 1373 x 801 x 58.8 732 x 431 x 55.5 Weight With stand (kg) 23.5 Without stand (kg)
Page 29
SPECIFICATIONS Manufacturer : APD AC/DC Adapter Model : DA-48F19, DA-40I19 Manufacturer : Lien chang (Only 22/28LY33**) Model : LCAP35 Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Digital TV...
Page 30
SPECIFICATIONS Component port connecting information RGB-PC, HDMI-PC Supported Mode Horizontal Vertical Component ports on the Resolution Frequency Frequency (kHz) (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 Video output ports on 640 x 480 31.469 59.94 DVD player 800 x 600 37.879 60.31...
IR CODES IR CODES This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button BACK Remote control Button (POWER) (Power On/Off) TV/RAD Remote control Button EXIT Remote control Button Remote control Button Remote control Button SUBTITLE AV MODE...
EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Type of Connector: D-Sub 9-Pin Male y Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an ex- ternal control device (such as a computer or an A/V control system) to control the product’s functions ex- ternally.
Page 33
EXTERNAL CONTROL DEVICE SETUP RS-232C Configurations Set ID Set ID number. “Real Data Mapping”. 7-Wire Configurations (Standard RS-232C cable) Press SETTINGS or HOME to access the main menus. Press the Navigation buttons to scroll to OPTION and press OK. Press the Navigation buttons to scroll to Set ID and press OK.
Page 34
EXTERNAL CONTROL DEVICE SETUP Communication Parameters y Baud rate: 9600 bps (UART) y Stop bit: 1 bit y Data length: 8 bits y Communication code: ASCII code y Parity : None y Use a crossed (reverse) cable. Command Reference List (Depending on Model) DATA DATA...
Page 35
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
Page 36
EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) 03. Screen Mute (Command: k d) ► To control Power On/Off of the set. ► To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Data 00 : Power Off 01 : Power On Video mute off...
Page 37
EXTERNAL CONTROL DEVICE SETUP 07. Brightness (Command: k h) 11. OSD Select (Command: k l) ► To adjust screen brightness. ► To select OSD (On Screen Display) on/off You can also adjust brightness in the when controlling remotely. PICTURE menu. Transmission [k][l][ ][Set ID][ ][Data][Cr] Transmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 : OSD off...
Page 38
EXTERNAL CONTROL DEVICE SETUP 15. Energy Saving (Command: j q) 7 6 5 Frequency 4 3 2 1 0 Step ► To reduce the power consumption of the 0 0 0 1st Band 0 0 0 0 0 0(decimal) TV. You can also adjust Energy Saving in PICTURE menu.
Page 39
EXTERNAL CONTROL DEVICE SETUP 20. Key (Command: m c) Input Number Data ► To send IR remote key code. Input1 Transmission [m][c][ ][Set ID][ ][Data][Cr] Input2 Data Key code - See p.31. Input3 Input4 Ack [c][ ][Set ID][ ][OK/NG][Data][x] Ack [b][ ][Set ID][ ][OK/NG][Data][x] 21.
Page 40
Record the model number and serial (Only DTV) number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
Page 41
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
Page 42
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 43
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 47
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 48
EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
Page 49
EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
Page 50
EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
Page 51
11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
Page 52
EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...