Advertisement
Quick Links
MA1406-EA
© 2014 CASIO COMPUTER CO., LTD.
Your watch may differ somewhat from the one shown in the illustration.
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull the
crown out. Avoid applying undue force when pulling. The watch
loses its water resistance while the crown is unscrewed. After
performing a crown operation, fully screw the crown back in.
If your watch has a rotary bezel...
You can rotate the bezel to align its ▼ mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the ▼ mark.
Specifi cations
Accuracy: ±20 seconds average per month
Battery: One silver oxide battery (Type: SR920SW)
Battery Life: Approximately 3 years
Operation Guide 5436
Day
Click 2
Click 1
Crown
Crown
Loosen
Start
Elapsed time
Current
To adjust the time setting
When the second hand is at 12 o'clock, pull
the
Crown
out to Click 2.
Rotate the
to change the time setting.
Crown
Push the
back in.
Crown
To change the day setting
Pull the
Crown
out to Click 1.
Rotate the
to set the day.
Crown
Push the
Crown
back in.
Note
Take care that you set the
correct AM or PM time.
When changing the time,
move the minute hand four
or fi ve minutes past your
fi nal setting, and then back it
up to the setting you want.
Note
The day setting uses a
31-day month. Make
adjustments for months of
shorter lengths.
Avoid changing the day
setting between the hours
of 9 p.m. and 1 a.m.
Otherwise, the day setting
may not change correctly at
midnight.
1
Advertisement
