8.
Click on the "Interfaces" tab on the top menu bar and
select 3G connection.
9.
In the "General" section, select the radio firmware for
the wireless service provider that you are using.
11. Click Save changes.
For GSM wireless service:
11. The network settings will populate automatically for
many SIM cards. Check the settings of the APN,
Username, and Password. Update if appropriate.
12. Click Save changes.
For CDMA service:
11. For both Verizon Wireless and Sprint services the
activation will occur automatically.
13. Click on the "Home" tab on the top menu bar.
14. Connection to the network will be setup automatically.
For online documentation and support please visit
http://support.usr.com/support/3510
8
Declaration of Conformity
complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
IC Approved
For additional regulatory information refer to
the online User Guide
9
10
11
12