Advertisement
FENDER MUSICAL INSTRUMENTS CORPORATION
•WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC
power to rain or moisture.
•Do not alter the AC plug of the connected power adapter
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified personnel only.
• WARNING: The unit must only be connected to a safety agency certified, regulated,
power source (adapter), approved for useand compliant with applicable local and
national regulatory safety requirements.
• Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth
for cleaning and then wait until the unit is completely dry before reconnecting it to power.
• Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable
of producing very high sound pressure levels which may cause temporary or permanent
hearing damage. Use care when setting and adjusting volume levels during use.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Manual available in Espanol, francais, Italiano, Deutch, Portugues, (Chinese)
IMPEDANCES:
POWER SUPPLY:
POWER REQUIREMENTS:
DIMENSIONS:
WEIGHT:
A PRODUCT OF:
CORONA, CALIFORNIA, USA
Fender® is a registered trademark of FMIC.
Copyright © 2018 FMIC. All rights reserved.
P/N 7713292000 - REV A
Important Safety Instructions
www.fender.com/support
Expanded Owner's Manual
Expanded Owner's Manual available at:
www.fender.com/support
Specifications
INPUT: 1M
One 9V battery or 9VDC regulated adapter,
5.5 x 2.1 mm barrel connector, center negative
120mA @ 9VDC
130mA, knob LEDs on
3.75" x 4.9" x 2.5" (95.25mm x 124.5mm x 63.5mm)
1.2lbs (.54kg)
Product specifications subject to change without notice
Languages
OUTPUT LOAD: >10k
Advertisement
