Instructions Guide; Basic Operation; Standby/Mode - MAJORITY SHELFORD II SEL-DAB-CRM-2 UK Instruction Manual

Instructions Guide

Basic Operation

Please note all (Ref.) refer to Page 1 Controls and Functions mapping guide.
Plug the connector into the back of the system labelled DC 5V
io
(Ref.12) and the power supply into the mains. Alternatively,
insert 4 x C batteries into the battery compartment for
portability.
Ensure the antenna (Ref.14) is extended as far as possible so that
you can rotate it. This will enable you to get the best signal you
can. At the back of the radio, switch the ON/OFF toggle to "ON"
(Ref.10).
Press the 'Standby/Mode' button to turn on the unit (Ref.1).
When DAB Radio is activated for the first time, you may need
to scan for available stations if scanning does not automatically
start. To do this, press the 'Scan/Snooze' button (Ref.2) for the
scan to start. To scroll through the stations, use the 'Previous' or
'Next' (Ref.5/6) buttons. Press the 'Enter' button (Ref.9) to listen
to a station.
In DAB mode, the radio will synchronize with the time and date
of the station.
To change the mode, press the 'Standby/Mode' button (Ref.1).
Standby
To switch your radio to Standby mode, press and hold the
Standby/Mode button. To turn on the radio, simply press the
Standby/Mode button.
5