1. Manuals
  2. Brands
  3. Makita Manuals
  4. Saw
  5. JR3020
  6. Instruction manual

Makita JR3020 Instruction Manual

Hide thumbs Also See for JR3020:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Recipro Saw
MODEL JR3020
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
002479

Advertisement

Table of Contents
loading

Related Manuals for Makita JR3020

Summary of Contents for Makita JR3020

  • Page 1 Recipro Saw MODEL JR3020 002479 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    Director have reached the end of their life MAKITA INTERNATIONAL EUROPE LTD. must be collected separately and Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 returned to an environmentally com- 8JD, ENGLAND patible recycling facility.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: tion and changing accessories.

  • Page 4: Additional Safety Rules For Tool

    ADDITIONAL SAFETY RULES FOR TOOL ENB012-1 Hold tool by insulated gripping surfaces when Make sure the blade is not contacting the work- performing an operation where the cutting tool piece before the switch is turned on. may contact hidden wiring or its own cord. Con- Keep hands away from moving parts.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting the shoe 002487 When the blade loses its cutting efficiency in one place along its cutting edge, reposition the shoe to utilize a sharp, unused portion of its cutting edge.
  • Page 6 Tool speed can be adjusted by turning the speed change knob. When the por- 002495 tion with mark is positioned adjacent to the pointer, faster speed can be obtained by turning the knob clockwise. When the portion with mark is positioned adjacent to the pointer, full speed can be obtained.

  • Page 7: Operation

    002507 CAUTION: • If you tighten the screw without the pin on the slider fitting properly in the hole in the blade shank, the pin or the blade shank will be damaged. This may cause the blade to be extracted unexpectedly during operation. To remove the blade, follow the installation procedure in reverse.

  • Page 8: Maintenance

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 9 Memo...
  • Page 10 Memo...
  • Page 11 Memo...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 883850B222...

Table of Contents