Additional Safety Rules For Tool - Makita JR3020 Instruction Manual

ADDITIONAL SAFETY RULES FOR TOOL

1.
Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its own cord. Con-
tact with a "live" wire will make exposed metal parts
of the tool "live" and shock the operator.
2.
Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
3.
Do not cut oversize workpiece.
4.
Check for the proper clearance beyond the
workpiece before cutting so that the blade will
not strike the floor, workbench, etc.
5.
Hold the tool firmly.
SAVE THESE INSTRUCTIONS
4
6.
Make sure the blade is not contacting the work-
piece before the switch is turned on.
7.
Keep hands away from moving parts.
8.
Do not leave the tool running. Operate the tool
only when hand-held.
9.
Always switch off and wait for the blade to come
to a complete stop before removing the blade
from the workpiece.
10. Do not touch the blade or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
ENB012-1