Manage Devices Screen; System Screen - ADT Pulse DBC835 Quick Installation Manual

Chapter 3: ADT Pulse Enrollment
Pu
Manage Devices
11. The
12. Click "System" page to check if the device is enrolled already.
13. Move the camera to where the doorbell button is located and check
the LED to see if the camera still has WiFi connectivity.
Note: If the WiFi cannot reach the front doorbell camera, you will see
the power LED kept blinking red. Then a repeater is required or move
the CloudLink/TSS to the center of the house.
10
screen is displayed. Click Close.
Figure 11: Manage Devices Screen
Figure 12: System Screen
DBC835 Wireless Doorbell Camera Installation