Table of Contents
Advertisement
Chapter 3 Management through the Web
Figure 3-28 Web Application - Optical Options: Statistics
3.11
Ethernet Options
3.11.1
Ethernet Options: Port Settings
The TC8518's Ethernet Port Settings displays each Ethernet port's status and allows
the configuration of port settings. Please refer to Figure 3-29, Web Application -
Ethernet Options: Port Settings.
Port In Use: Enable or disable the Ethernet port. Default setting is Enabled.
Speed/Duplex: Choose either 100Mbps Full, 10Mbps Full, 100Mbps Half, 10Mbps
Half. Default setting is Auto-Negotiate.
Flow Control: Enable or disable Flow Control; Default is disabled.
Eth # Label: Label the port with desired name to distinguish from other ports, up to
30 characters.
Huge Frame Support: Enable support for Ethernet frames up to 1916 bytes.
Timed Local Loopback: Enable local loopback on an Ethernet port. Range of 1-
1440 minutes.
Note: This feature is for advanced users only. Enabling this can have serious
consequences on your network. It is intended for users with Ethernet testers.
TC8518 Rev 2.2
User Manual
Ethernet Options
3-31
Advertisement
Table of Contents
