Electrical System
Replacing Bulbs
To remove, push the bulb in and
turn to the left, then lift the bulb
out.
To install, grip the bulb w ith a pa
per tissue or similar cloth, align the
pins on the base o f the bulb w ith
the grooves in the bulb socket,
push in lightly and turn to the right
until the stop is felt.
Install only bulbs o f prescribed
w attage. Refer to "Technical Data
and last page".
64
Headlight Aim ing
Correct headlight aiming is o f par
am ount im portance to th e road
w orthiness of the car. Check and
readjust headlights at regular inter
vals and invariably when a lamp
has been replaced.
Front Lights
(Sealed Beam Version — U SA
Specifications, Fog Light)
1
Cover. Remove cover (1) after
backing out knurled plastic
nuts located behind head
lights.
2
Sealed-beam unit fo r high and
low beam
;88 8 0
Fog light
3
4
Turn signal, clearance (stand
ing) and side marker light
Securing nuts fo r cover
5
Securing nuts fo r turn sig
6
nal, clearance (standing) and
side marker light
Vertical aim ing screw, sealed-
7
beam u nit
8
Horizontal aiming screw,
sealed-beam unit
Vertical aiming screw, fog
9
light
Horizontal aiming screw,
10
fog light