Craftsman 151.98837 Operator's Manual page 13

OPERATION
WARNING! Adjust the Flower Guard
position only when the product is switched off
and the cutting device is at a complete stop!
GENERAL OPERATION
■ Check the trimmer, its battery pack and
charger as well as accessories for damage
before each use. Do not use the trimmer if it
is damaged or shows wear.
■ Double check that accessories and
trimming blades are properly installed.
■ Always operate the trimmer with hands on
both handles. Keep the handles dry so that
hands do not slip off.
■ Ensure that the air vents are always
unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air
vents may lead to overheating and damage
the product.
■ Release the trigger immediately to stop the
trimmer if you are disturbed by other people
entering the working area. Always let the
trimmer head come to a complete stop before
setting the trimmer down.
■ Do not overwork. Take regular breaks to
ensure you can concentrate on the work and
have full control over the trimmer.
13 ― English