Vallon VMH3CS Operation Manual page 57

56
The detection area is on the left and right side of the white sign on the top of the stick
probe. That means for checking a hole the stick probe must be turned by 90° to
reach all sides.
detection direction
2. Technical Data which are different from Appendix C
Dimensions
Telescopic pole with stick probe:
Length of stick probe:
Diameter of stick probe:
Length of detection zone:
Weights
Detector ready for service
with stick probe:
Stick probe:
Metal Detector VMH3CS – Operation Manual
© 2007 Vallon GmbH, D-72800 Eningen/Germany
white marking
detection direction
min. length: 935 mm  5 mm
max. length: 1278 mm ± 5 mm
445 mm  5 mm
40 mm Ø
120 mm
approx. 2.3 kg
approx. 0.58 kg