Latch-Type (Isofix) Child Seat Anchors - Mercedes-Benz R 350 Operator's Manual

LATCH-type (ISOFIX) child seat anchors

in the rear
G WARNING
Children that are too large for a child restraint
must travel in seats using normal seat belts.
Position shoulder belt across the chest and
shoulder, not face or neck.
A booster seat may be necessary to achieve
proper seat belt positioning for children over
41 lb (18 kg) until they reach a height where
a lap/shoulder belt fits properly without a
booster.
Install the child restraint system in
accordance with the manufacturer's
instructions.
Attach the child restraint system to both
securing rings.
An incorrectly installed child restraint system
could come loose during an accident and
seriously or even fatally injure the child.
Child restraint systems or child seat securing
rings that are malfunctioning or damaged as
the result of a collision must be replaced.
Outer seat in the second row
Securing rings
:
Installation instructions for the securing
;
ring
Children in the vehicle
Securing ring : for two LATCH-type (ISOFIX)
child restraint systems can be found on the
left and right:
on the seat cushions of the outer seats in
R
the second row
on the backrests of the seats in the third
R
row of seats
Move the rear seat backrests in the second
X
row to an upright position (
Slide the upholstered lining over retaining
X
loop : to one side.
Install the LATCH-type (ISOFIX) child seat
X
securing system. Comply with the
manufacturer's instructions when
installing.
Seat in the third row
The securing rings on the seats in the third
row are covered by protective caps.
Remove protective caps = in the third row
X
of seats.
Securing rings for the third row of seats
?
Install the LATCH-type (ISOFIX) child seat
X
securing system. Comply with the
63
page 106).
Y
Z