Configuring The Printer - Sony UP-D711MD Setup Manual

The screens used to describe setup in this guide assume
that the UP-D711MD printer is used in a Windows 7
environment. For further details on settings, refer to the
operating instructions for the printer in combination
with this manual.

Configuring the Printer

You can open the UP-D711MD settings screen and
configure various settings before you begin printing
from applications.
Set up the printer in the following environment.
• Display resolution more than SVGA (800 × 600)
• Screen character size is the default.
Windows XP: Normal size (96 DPI)
Windows Vista: Default scale (96 DPI) - fit more
information
Windows 7: smaller - 100% (default)
You can open the settings screen using one of the
following methods.
• On the [Start] menu, select [Devices and Printers]
([Control Panel], then [Printer] on Windows Vista;
[Printers and Faxes] on Windows XP). Select the Sony
UP-D711MD printer icon, then right-click to select
[Printing preferences] ([Select printing preferences]
from the command bar on Windows Vista; [Printing
preferences] from [File] menu on Windows XP). The
settings that you make here are normally used as the
default settings for the UP-D711MD printer. However,
the default settings of some application software may
take precedence.
• On the [File] menu of your application, click the
command used to make printer settings. The settings
made this way only remain valid until you close the
application.
This guide describes the tabs that appear in the
UP-D711MD settings screen.
[Main] tab
Adjusts the basic settings related to printing, such as
paper size, paper type, number of print copies, etc.
[Density Adjust] tab
Adjusts the density of the print images.
[Message] tab
Sets the display settings related to message dialog
boxes.
3
Configuring the Printer