BodiMetrics O2 Quick Start Manual page 2

To Synch Your O Vibe Device with Mobile App
2
1. Turn on your O2 Vibe by pressing button on side and
look for Bluetooth icon on your device.
2. Open the O Vibe application on your mobile phone,
2
iPad or Tablet and choose your device listed to establish
a Bluetooth connection.
3. Your new records will show updating on your mobile
application.
To View Results and Settings on Mobile App
You can switch on/off vibration, adjust intensity and
threshold (SpO2) of vibration in the app. After each
measurement or when you turn on the device, the results
can be provided in the APP on your phone via Bluetooth.
Turn on the Bluetooth of your phone, enter the O2 Vibe
APP and choose your device on the screen; your phone will
connect automatically.
Note: The O2 Vibe device's Bluetooth will automatically
turn on within the first 2 minutes. Or it will turn on
automatically after the measurement completes until you
power OFF.
To Upgrade O Vibe Device Software
2
1. Turn ON your O Vibe device.
2
2. Open the O Vibe application on your mobile phone,
2
iPad or Tablet and choose your device listed to establish
a Bluetooth connection.
3. Touch Device -> Device update -> Update in your O
Vibe application and wait until update is complete.
About O2 Vibe Screens
When you turn on the device, screen shows the time,
fitness or sleep mode, and battery capacity.
Sleep Mode Fitness Mode
Four seconds later it shows measurement results if you
don't perform any action. If there is no measurement
results, the pulse rate symbol will flash.
In Sleep Mode, if the Finger Sensor is disconnected from
the device, or the Sensor slips from your finger, it starts
countdown from 10 seconds.
If you don't reposition the sensor or insert the plug into the
device in 10 seconds, it will stop measuring automatically
and show the O2 score and how many times the SpO2
dropped below the threshold. Two minutes later it will
automatically power off.
In Fitness Mode if the Finger Sensor is disconnected from
the device, or the Sensor slips from your finger, it starts
countdown from 30 seconds.
If you don't reposition the sensor or insert the plug into the
device in 10 seconds, it will stop measuring automatically
and show the O2 score and how many times the SpO2
dropped below the threshold. Two minutes later it will
2
automatically power off
In Fitness Mode, you can press the button on the side of
the device to change screen to show the number of steps
you have taken.
Cloud
1. Touch the Cloud icon in the upper right-hand corner of
the app, and then create an account.
2. Sign into the O Vibe APP, fill in your account and user
2
profile.
3. Data can be synced with the Cloud once you set up your
profile. To share data or records you must set up an
account under your profile.
Troubleshooting
Specifications
How to contact us?
BodiMetrics
1601 N Sepulveda Blvd, Suite 839
Manhattan Beach, CA 90266 USA
www.BodiMetrics.com
Toll Free: (844) 744-8800
Email: info@bodimetrics.com