BodiMetrics O2 Vibe Quick Start Manual

Wrist pulse oximeter
Hide thumbs Also See for O2 Vibe:

Advertisement

O2 Vibe
Wrist Pulse Oximeter
Quick Start Guide
The O2 Vibe Pulse Oximeter can monitor whole night blood oxygen
saturation (SpO
) and heart rate and detect oxygen drops. The built-in
2
vibrator can help people to overcome the oxygen shortage period,
therefore to improve their sleep quality. O2 Vibe can also be used for
fitness monitoring and activity tracking.
Caution
This product is not a medical device, DO NOT use it for the diagnosis
and treatment of any medical condition.
Package content
1 O2 Vibe Main Unit
1 Ring Sensor
1 USB Cable (Micro D)
1 Start Quick Guide

Using O2 Vibe Pulse Oximeter

Charge the battery before the first use
Connect the battery using the USB cable provided for about 2 hours or
until the screen shows fully charged icon
.
Install O2 VIBE APP
Download and install the app O2 Vibe from the Apple APP Store or
Google Play Store.
Power on/off
Press and hold the button for 1 second to power on the device, 3
seconds to power off the device.
View results and set preferences via APP
After each measurement or when you turn on the device, the results
can be provided in the APP on your phone via Bluetooth. Turn on the
Bluetooth of your phone, enter the O2 Vibe app and choose the right
device, then the device and your phone will connect successfully. You
can switch on/off vibration, adjust intensity and threshold (SpO
vibration, and set steps goal in the app.
Note: The device Bluetooth will automatically turn on within the first
2 minutes. Or it turns on after measurement complete until power off.
Get it work
1.
Connect the ring sensor to the connector on
the device.
2.
Wear the ring sensor into your thumb as
picture or other finger in the case of not fitting
well.
3.
Press the button to turn on the device,
change the mode by press the button in the first
4 seconds if necessary. After a few seconds, your
SpO
reading will appear on the screen.
2

About O2 Vibe screens

SpO
Percent oxygen saturation
2
Heart rate
Insert the plug into the connector on the device
Slide your finger into the sensor
) of
2
O2 score and Drop times (SpO
lower than threshold)
2
Steps
O2 Score range in the APP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the O2 Vibe and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BodiMetrics O2 Vibe

  • Page 1 Connect the ring sensor to the connector on Charge the battery before the first use therefore to improve their sleep quality. O2 Vibe can also be used for the device. Connect the battery using the USB cable provided for about 2 hours or fitness monitoring and activity tracking.
  • Page 2 numbers and device status. Troubleshooting Specifications Switching operation mode Problem Possible Cause Possible Solution Weight 35g (main unit) Size 44×25×15 mm (main unit) Device Battery Charge battery and try again. The device has 2 operation modes, Sleep mode and Fitness mode, does low.
  • Page 3 responsible for compliance could How to contact us? void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the Shenzhen Viatom Technology Co., Ltd limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 4E,Building 3, Tingwei industrial Park, Honlang North 2 Road, These limits are designed to provide reasonable protection against...

Table of Contents