BodiMetrics O2 Vibe Quick Start Manual

O Vibe Fitness &
2
Sleep Monitor
Quick Start Guide
BodiMetrics LLC
1601 N.Sepulveda Blvd., Suite 839
Manhattan Beach, California 90266
www.BodiMetrics.com
Toll Free: (844) 744-8800
The O Vibe monitor has two modes: Sleep and Fitness.
2
Both modes offer continuous blood oxygen saturation
(SpO2) and heart rate. Both also have customizable
vibrating alerts to remind you to walk to meet your step
goals or wake you if your SpO2 drops below the threshold
you set. The O Vibe tracks SpO2, Heart Rate, and Motion
2
during Sleep and Steps during light exercise to help you
live a healthy lifestyle
This product is not a medical device and should
not be used to diagnose or treat any medical
condition.

Package contents

(1) O Vibe Main Unit
2
(1) USB Thumb Ring Sensor
(1) USB Charging Cable (Micro D)
(1) Quick Start Guide
Using O Vibe
2
Charge the battery before the first use
Connect the device to the USB port of your computer
using the provided USB Charging Cable until fully charged;
typically less than 2 hours to fully charge.
Install O Vibe Application
2
Search Apple (iOS devices) or Google (Android devices)
Stores for free O Vibe application and download to your
2
mobile phone; iPad or Tablet.

Power on/off process

Press and hold the button for 1 second to power on the
device, 3 seconds to power off the device.

Set preferences and view results via APP

You can switch on/off vibration, adjust intensity and
threshold (SpO2) of vibration in the app. After each
measurement or when you turn on the device, the results
can be provided in the APP on your phone via Bluetooth.
Turn on the Bluetooth of your phone, enter the O 2 Vibe
app and choose the right device, then the device and your
phone will connect successfully.
Note: The device Bluetooth will automatically turn on
within the first 2 minutes. Or it turns on after the
measurement completes until power is off.

How it works

1. Put your O Vibe on your wrist.
2
2. Connect the ring sensor to the connector on
the device.
3. Slide the ring sensor onto your thumb as
pictured or other finger if it does fit well on your
thumb.
4. Press the button to turn on the device; then press
button again to change the operation mode (Sleep or
Fitness) you desire. After a few seconds, your readings will
begin appearing on the screen.

About device screens

SpO2 Oxygen saturation
Heart rate
Insert USB Thumb Sensor into O Vibe port
2
Slide your finger into the sensor

Sleep Score

Sleep Score and number of times SpO2 dropped below
threshold set.

Operation mode navigation

The O Vibe has 2 operation modes,

Sleep Mode

and
2
Fitness Mode, press the button can switch between this
two modes within seconds after power is on.
Sleep Mode
Screen will be dark until you Press button on the side of the
O Vibe to wake up the application to show status of
2
measurement and results. The screen will go dark after a
few seconds of no operation.

Fitness Mode

Screen is Always On; Press the button to change display to
show various measurements and results including steps,
HR and SpO2 metrics.