Normal; Scan; Weather - Uniden MHS335 Owner's Manual

Mode What it does
Monitors a single marine

Normal

channel and lets you talk on
that channel.
- Monitors priority channels
set in the Main menu.

Scan

- Monitors all the channels
you save into memory.
Monitors the selected NOAA

Weather

weather channel.
In addition to the three operation modes, your radio provides three different watch modes
which you can activate during any operation mode. In the watch modes, the radio briefly
checks for activity on a specific channel, then returns to its previous operation.
Watch mode What it does
Checks the last-used weather
Weather Alert
channel for hazard alerts every few
Watch
seconds.
Checks the priority channel for
Dual Watch activity every few seconds. (Default
priority channel = 16)
Checks the priority and second
priority channels for activity every few
Triple Watch seconds. (Priority channel default -
16; second priority channel default
= 9)
Note: Private ships must monitor channel 16. Whenever they are underway. Water-going ships
should have either Triple Watch or Dual Watch on at all times.
Uniden MHS335 Radio Owner's Manual
Use it when you want to... To turn it on/off
Monitor a channel or talk to
another radio.
- Monitor up to 2 additional
channels in addition to
the channels saved in
memory.
- Check a small group of
regularly-used channels
for traffic.
Hear the current or
forecasted weather.
To turn it on/off
From MENU, select
SETUP
. Go to Weather Radio and
select WX Alert to turn on or off.
From MENU, select
SETUP
. Go to DUAL/TRI Watch
and select Dual to turn Dual Watch
on or Triple to turn Triple Watch on
(and Dual Watch off).
From MENU, select
SETUP
. Go to DUAL/TRI Watch and
select Triple to turn Triple Watch on
or Dual to turn Dual Watch on (and
Triple Watch off).
From any mode,
press CLR.
The Idle screen
displays. Select
a different mode
to turn Normal
mode off.
Press SCAN
soft key to start
scanning. Press
SCAN again to
stop.
Press MENU.
RADIO
Go to
SETUP
/Weather
Radio.
RADIO
RADIO
RADIO
E-19