Table of Contents
Advertisement
OPENING THE BAT TERY COMPARTMENT
LOADING THE BAT TERY
Load the 18650B Li-ion battery according to the indications on the positive
and negative electrode.
AT TENTION
• The battery cannot be placed in reverse polarity.
• Only one 18650B Li-ion battery is required.
• When needed, replace battery with a new 18650B Li-ion battery with
PCB-protection circuit.
BUILT-IN / INTERNAL CHARGING
1. Connect the AC power adapter that is include in your kit and to the unit's
micro USB battery recharging port.
2. Plug the AC power adapter into a standard wall outlet.
3. The battery is charging when the On/Off Charging Indicator light is red.
Charging is finished when this indicator light is green.
WARNING
• Use only the supplied AC power adapter for recharging the battery—input
of 100-240 V (50/60 Hz) AC, output of DC5V 2A, with micro USB interface.
• Use of an adapter that does not comply with the above specifications
will cause fire, electrical shock or severe damage to the battery and/or
borescope, and will void the warranty.
• The power adapter provided with this product is not waterproof. It may
cause electric shock if it comes into contact with water.
Push the compartment
cover down gently with the
thumb to open the battery
compartment.
Fig. 6-4 Opening the
battery compartment
9
Advertisement
Table of Contents
Need help?
Do you have a question about the VJ-3 and is the answer not in the manual?
Questions and answers