Set Label Attributes
Creating Fixed-Length Label
Creating Auto-Sized Label
BradyPrinter S3100 Sign & Label Printer User's Manual
Use this procedure to create a label where the continuous-media label length is
set, not variable. Once selected, the printable area shown on the label is reduced
by the amount of the leader/trailer required for the installed supply, so that the total
label length output matches the selected length.
Note: The label size for die-cut media is already set and cannot be adjusted.
To create a fixed-length label:
1. From the Home page, touch the Menu button.
2. In the menu list, touch the Size & Orientation button.
Note: You can also access the Label Size & Orientation box by touching the
Label Size text at the bottom of the screen.
3. On the Label Size & Orientation dialog box, select the Fixed Length check
box.
4. In the field to the right of the Fixed Length check box, enter the desired label
length.
Note: Minimum supported length is 0.5 in. (12.7 mm). Maximum supported
length is 60 in. (1524 mm).
5. Touch the OK button. The Status Bar indicates the new label length.
Use this procedure to create a label where the continuous-media label length
adjusts to fit the data that you add to the label (variable label length).
Note: The label size for die-cut media is already set and cannot be adjusted.
To create an auto-sized label:
1. From the Home page, touch the Menu button.
2. In the menu list, touch the Size & Orientation button.
3. Select the Autosize to Fit Data check box. When entering data, the label size
will automatically be adjusted to fit the data.
4. Touch the OK button.
Set Label Attributes
Creating Auto-Sized Label
31