Malaguti F10 2008 Workshop Manual page 37

OK
. Voltage level of flashlight
• Disconnect flashlight connector.
• Connect Tester (0 v DC) as follows:
• Terminal (+) of Tester
• Terminal (-) of Tester
• Turn key "ON".
• Voltage must be: > 1 v
OK
. Continuity of brown/black cable
• Disconnect flashlight connector.
• Disconnect left hand switch connector.
• Connect Tester (Ω) to terminals of respective connectors.
• Check continuity of brown/black cable.
OK
Replace flashlight.
S I G N A L L I N G S Y S T E M
blue cable (1).
Chassis grounding ().
blue cable is interrupted: repair.
See "Wiring Diagram" (P. 8).
brown/black cable is interrupted: repair.
See "Wiring Diagram" (P. 8).
NO
NO

Tester (DC 0 v)
1
M-N
BL

Tester (Ω)
F. 27
F. 28