Table of Contents
Advertisement
Connecting Cords
Connect source devices to appropriate display input. Make all connections prior to powering on the
display. The USB 2.0 Data port is for service and media only. For 5VDC power, use the 5VDC power
port.
18
Extender
RS232C
3
1.
2.5mm DC Power Port – Provides 12 VDC @ 2.5 A for powering locally stored extenders and
source devices. 12 VDC accessory kits (ACCD-12K) are sold separately from Peerless-AV by
contacting Customer Care at 800-865-2112.
2.
USB DC Power Port – Provides 5 VDC @ 2.4 A for powering locally stored extenders and
source devices. 5 VDC accessory kits (ACCD-05K) are sold separately from Peerless-AV by
contacting Customer Care at 800-865-2112.
3.
RS232C DB9 Port – Allows for control of the display using RS232 commands from a connected
PC or control system. Pin Out: Pin 2 (RX), Pin 3 (TX), Pin 5 (GROUND)
4.
3.5mm IR Extender Port – Allows flexibility for integration with controls systems. The IR extender
can be used to position the IR receiver in a convenient position in the event the IR receiver on
the front of the display is obscured.
5.
3.5mm Analog Audio Out Port – Provides analog stereo audio for soundbars, headphones, and
amplifiers.
6.
USB 2.0 Data Port – Allows content to be displayed using a USB flash drive. This feature
supports text, photo, audio and video. This port also serves as a service port for firmware
upgrades. This port should not be used for powering 5 VDC devices.
7.
DisplayPort – Connects a digital source device with the display and allows for FHD video and
digital audio to be output on the display. DisplayPort is version 1.2 and is HDCP 1.3 compliant.
8.
HDMI 1 (ARC) - Connects a digital source device with the display and allows for FHD video
and digital audio signal to be output to the display. HDMI 1 is HDMI version 2.0 and is HDCP
2.2 compliant. All 3 of the HDMI inputs also support consumer electronics control (CEC). CEC
allows for intelligent communication between CEC-enabled devices through the use of the HDMI
connection with either the source remote control or the display remote control. HDMI 1 also
supports the audio return channel (ARC) allowing audio content from the display to be output to
an AVR using a single HDMI cable eliminating the need to backfeed audio.
9.
HDMI 2 - Connects a digital source device with the display and allows for FHD video and
digital audio signal to be output to the display. HDMI 2 is HDMI version 2.0 and is HDCP 2.2
compliant. All 3 of the HDMI inputs also support consumer electronics control (CEC). CEC
allows for intelligent communication between CEC-enabled devices through the use of the HDMI
connection with either the source remote control or the display remote control.
10. HDMI 3 - Connects a digital source device with the display and allows for FHD video and
digital audio signal to be output to the display. All 3 of the HDMI inputs also support consumer
electronics control (CEC). CEC allows for intelligent communication between CEC-enabled
devices through the use of the HDMI connection with either the source remote control or the
display remote control. HDMI 3 is HDMI version 2.0 and is HDCP 2.2 compliant. HDMI 3 also
supports mobile high definition link (MHL3.0) allowing MHL compatible mobile devices to output
HD content to the display, transport control and charge the connected device.
4
17
LAN
ALS
IR
Extender
Display
Audio
USB 2.0
Port
Out
Data
5
6
7
HDMI 2
HDMI 3
HDMI 1
8
9
10
10
14
15
16
Mini AV
Antenna or
Mini AV
Component
Cable
Audio
S/PDIF
VGA
In
Optical
11
12
13
2018-05-30
1
___
---
12V
2500mA
USB Power
___
---
5V
2400mA
2
#:180-9116-1
Advertisement
Table of Contents
