Table of Contents
Advertisement
Add Wing Struts
Add wing struts by cutting 2mm wire lengths to 12.6in (2x rear struts) and 12.75in (2x front
struts) and then crimping the ends with dikes and heat staking them into their respective
brackets. (heat with a flame) With the struts made screw them to the fuselage and the wing.
Add Weight to Nose
Add enough balance weights to the nose to get the plane to balance slightly nose down. It
should take around 120g in order to achieve this. The weights should be placed into the
fuselage1 piece and opposite the esc in fuselage2 to get them as far forward as possible.
21
Advertisement
Table of Contents
